close
Categories
Filter By
Brand
- A & M INDUSTRIES626
- ACE PUMP CORPORATION187
- ACE ROTO-MOLD MFG INC385
- AR NORTH AMERICA83
- BANJO CORPORATION1092
- C & R SUPPLY1130
- COX REELS4
- DETHMERS MANUFACTURING45
- DOSATRON22
- DUO LIFT3
- DURA PRODUCTS21
- FILL-RITE19
- FLOWSERVE PUMP CORP52
- GREENLEAF TECHNOLOGIES30
- HANNAY REELS INC.18
- HD HUDSON MFG CO5
- HYPRO LLC442
- JOHN BLUE CO214
- NORWESCO, INC192
- RAVEN IND (NW-9348)672
- SPRAY TARGET7
- SPRAYING SYSTEMS CO.876
- SQUIBB TAYLOR INC10
- TEEJET TECHNOLOGIES52
- TERREMAX43
- TEXAS INDUSTRIAL REMCOR33
- TOTALLY TUBULAR22
- UDOR U.S.A.41
- WILGER INC.130
TOTALLY TUBULAR, DUO LIFT, HD HUDSON MFG CO, TEEJET TECHNOLOGIES - FILL-RITE
101 items
**JD9C; GREEN GARDE GUN
500 JD9C
*BOOM INTERFACE MODULE
097 78-05091
*INTERFACE TIP FLOW MONITOR
097 78-05101
*SINGLE TIP SENSOR INTERFACE, SNAP-IN SE
097 78-05104
*KIT; 744A CONSOLE WITH CABLES
097 90-50149
*KIT; 744A CONSOLE, CABLES, REG VALVE
097 90-50161
*KIT, MATRIX 430, GLONASS, RXA30, CIG
097 GD430-GLO-R30-L
*KIT, MATRIX 430, PATCH ANTENNA
097 GD430-P
*KIT, MATRIX 430, RXA30 ANTENNA
097 GD430-R30
*GASKET FLANGE TO PUMP
139 400F6924
*2" MPT INLET FLANGE
139 400G8071
*DIAPHRAM + VALVE KIT 2009 & NEWER
139 400KTH1178
*PUMP REBUILD KIT 2009 & NEWER
139 400KTH1457
*METER, 1" SOTERA MECHANICAL
139 807CN1
*SOTERA DIGITAL METER
139 825
*METER, SOTERA "NO AIR"-1",2-20GPM
139 850
*REPAIR KIT, ALL 900 SERIES METERS
139 900KT
*1-1/2" METER, SOTERA
139 901N1.5
*SWITCH; 400 SERIES OLD SERIES
139 F3170
*DIAPH ASSY W/CHK VLVS-400F8964
139 F6917
*ANTI-DRIP NOZZLE SPOUT-BANJO
139 KTF0236
*METER KIT; 820,825,& 850 MODELS
139 KTF1582
*12V DIAPHRAM PUMP-SOTERA
139 SS415
*KIT, 415 W/ BRACKET AND PLUMBING
139 SS415-CAGE
*KIT, 415 W/ BRACKET AND PLUMBING
*115 V SOTERA DIAPHRAGM PUMP
139 SS460BX731
*CHEMTRAVELLER, 115 VOLT KIT- NO METER
139 SS465BX713
**GREEN GARDE GUN; ECONOMY
500 38505
**TEFLON REPAIR KIT; JD9C HANDGUN
500 38511
**HAND HELD PUMP UP SPRAYER
500 H79142
For industrial use, this hand held 2-liter compression sprayer features an adjustable poly cone spray nozzle for all your applications. Use with: Industrial cleaners and degreasers, Janitorial & Sanitation applications, Pest Control, Disinfectants, Solvents, Fabric Sealants, Weed Control, and more. Product Info Easy to pump, adjustable spray from long stream to fine mist. Tough poly jar with easy-fill opening. Easy grip handle with locking thumb-operated trigger. Excellent for pest control, disinfectants, solvents, and fabric sealants..
**TRAILER; TRIPPLE CONE-LESS TANKS
500 TRAILER-TC9000
**FINGER TUBE;7000/7100JD+2000 KINZE
500 TT001
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**TT001 TUBE W/ OVER-SIZED ROLL PINS
500 TT001-OS
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 Oversized If your roll pin holes for your seed tube guard on your planter show wear your seed tube guard will not fit snug. We suggest this product. The roll pin holes are enlarged to 13/32 in. This will allow the seed tube guard and attached fertilizer tube to hold fast and snug to your row unit. This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**ROW UNIT; 1700/7200/7300 NON-XP
500 TT002
**TT002 TUBE W/ OVERSIZED ROLL PINS
500 TT002-OS
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 Oversized If your roll pin holes for your seed tube guard on your planter show wear your seed tube guard will not fit snug. We suggest this product. The roll pin holes are enlarged to 13/32 in. This will allow the seed tube guard and attached fertilizer tube to hold fast and snug to your row unit. This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**FINGER TUBE; JD MAX EMERGE 5 SERIES
500 TT007
John Deere Starter Fertilizer Placement Tube Part #TT-007 This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits • Starter Fertilizer application deeper in the soil profile • Instant root uptake for early plant health • Maintenance free Installation Instructions: 1. Remove depth Guage wheels and disc openers, making sure to note correct shim placement. 2. Remove stock seed tube guard. 3. Install new Totally Tubular part TT007. 4. Bend centering tab against row shank. The picture above shows the tab before it is bent against the shank. Tap centering tab with mallet to firmly hold tube centered. 5. Reinstall disc openers, making sure you have correct shim placement. Recommend replacing disc openers when you put our fertilizer tubes on. Â
**SEED BOUNCE FLAP; FINGER TUBE
500 TT008
Part #TT-008 This rubber flap installs into the seed tube for simple control of seed bounce. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. This ensures the seed is getting into the seed trench and not on top of the ground. It also helps in the plantability of light seeds such as sugar beets and protects them from the "floating effect" when traveling down wind. This product works with the Precision Seed Tube, however the roll pin will need to be cut down, and the flap itself has to be cut down lengthwise to fit into the smaller opening of this seed tube. This product will not work with the Bullseye Seed Tube. Installation Instructions: Drill a 1/8" hole through seed tube using supplied template. It is very important that this hole is drilled straight, so removing the seed tube and using a drill press is recommended Insert the seed bounce flap pin into one of the above holes and twist seed bounce flap up into position, snapping the other side of the roll pin into the adjacent hole Re-Install seed tube
