close
Categories
Filter By
Brand
- A & M INDUSTRIES626
- ACE PUMP CORPORATION187
- ACE ROTO-MOLD MFG INC385
- AR NORTH AMERICA83
- BANJO CORPORATION1092
- C & R SUPPLY1130
- COX REELS4
- DETHMERS MANUFACTURING45
- DOSATRON22
- DUO LIFT3
- DURA PRODUCTS21
- FILL-RITE19
- FLOWSERVE PUMP CORP52
- GREENLEAF TECHNOLOGIES30
- HANNAY REELS INC.18
- HD HUDSON MFG CO5
- HYPRO LLC442
- JOHN BLUE CO214
- NORWESCO, INC192
- RAVEN IND (NW-9348)672
- SPRAY TARGET7
- SPRAYING SYSTEMS CO.876
- SQUIBB TAYLOR INC10
- TEEJET TECHNOLOGIES52
- TERREMAX43
- TEXAS INDUSTRIAL REMCOR33
- TOTALLY TUBULAR22
- UDOR U.S.A.41
- WILGER INC.130
TEEJET TECHNOLOGIES, DOSATRON, COX REELS, HANNAY REELS INC. - TOTALLY TUBULAR
118 items
**FURROW FORCE DUAL FERTLIZER TUBE
500 TT314F
*D14 REBUILD KIT
664 MKD14MZ2VF
*BOOM INTERFACE MODULE
097 78-05091
*INTERFACE TIP FLOW MONITOR
097 78-05101
*SINGLE TIP SENSOR INTERFACE, SNAP-IN SE
097 78-05104
*KIT; 744A CONSOLE WITH CABLES
097 90-50149
*KIT; 744A CONSOLE, CABLES, REG VALVE
097 90-50161
*KIT, MATRIX 430, GLONASS, RXA30, CIG
097 GD430-GLO-R30-L
*KIT, MATRIX 430, PATCH ANTENNA
097 GD430-P
*KIT, MATRIX 430, RXA30 ANTENNA
097 GD430-R30
**1520-17-18E
500 1520-17-18E
**12V ELEC MOTOR, 2" & 3" HANNAY
500 9915.0003
**PUSH BUTTON FOR HANNAY REEL
500 9917.0004
**50 AMP BREAKER
500 9917.0021
**HANNEY REEL SOLIDNOID
500 9917.0025
**SWIVEL 3", HANNAY
500 9933.6500
**1500 ROLLER BRACKET
500 9941.0035
**HOSE REEL,12V,3" X 80'
500 EP9338
**HOSE REEL,12V, 3" X 50'
500 EP9346
**COX REEL 3/8X100'
500 HRC38100
**COX REEL 3/8X150'
500 HRC38150
**COX REEL 1/2X225'
500 HRC50225
**COX REEL 1/2X350'
500 HRC50350
**2" HOSE REEL, 12VOLT REWIND
500 HRE200
**HOSE REEL, MANUAL
500 HRH
**2" HOSE REEL, MANUAL REWIND
500 HRH200
**FINGER TUBE;7000/7100JD+2000 KINZE
500 TT001
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**TT001 TUBE W/ OVER-SIZED ROLL PINS
500 TT001-OS
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 Oversized If your roll pin holes for your seed tube guard on your planter show wear your seed tube guard will not fit snug. We suggest this product. The roll pin holes are enlarged to 13/32 in. This will allow the seed tube guard and attached fertilizer tube to hold fast and snug to your row unit. This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**ROW UNIT; 1700/7200/7300 NON-XP
500 TT002
**TT002 TUBE W/ OVERSIZED ROLL PINS
500 TT002-OS
John Deere and Kinze Starter Fertilizer Placement Tube Part #TT-001 Oversized If your roll pin holes for your seed tube guard on your planter show wear your seed tube guard will not fit snug. We suggest this product. The roll pin holes are enlarged to 13/32 in. This will allow the seed tube guard and attached fertilizer tube to hold fast and snug to your row unit. This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: 1. Remove depth gauge wheels and disc's, taking note of shim placement 2. Remove factory seed tube guard remove disc guard bolt on the right side of the row unit (standing behind) 3. Lift TT-001 up into position on row unit 4. Align roll pin holes and install new roll pins (supplied) 5. Re-Install seed tube 6. Re-Install disc openers taking care to get the correct shim placement 7. Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
**FINGER TUBE; JD MAX EMERGE 5 SERIES
500 TT007
John Deere Starter Fertilizer Placement Tube Part #TT-007 This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits • Starter Fertilizer application deeper in the soil profile • Instant root uptake for early plant health • Maintenance free Installation Instructions: 1. Remove depth Guage wheels and disc openers, making sure to note correct shim placement. 2. Remove stock seed tube guard. 3. Install new Totally Tubular part TT007. 4. Bend centering tab against row shank. The picture above shows the tab before it is bent against the shank. Tap centering tab with mallet to firmly hold tube centered. 5. Reinstall disc openers, making sure you have correct shim placement. Recommend replacing disc openers when you put our fertilizer tubes on. Â
**SEED BOUNCE FLAP; FINGER TUBE
500 TT008
Part #TT-008 This rubber flap installs into the seed tube for simple control of seed bounce. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. This ensures the seed is getting into the seed trench and not on top of the ground. It also helps in the plantability of light seeds such as sugar beets and protects them from the "floating effect" when traveling down wind. This product works with the Precision Seed Tube, however the roll pin will need to be cut down, and the flap itself has to be cut down lengthwise to fit into the smaller opening of this seed tube. This product will not work with the Bullseye Seed Tube. Installation Instructions: Drill a 1/8" hole through seed tube using supplied template. It is very important that this hole is drilled straight, so removing the seed tube and using a drill press is recommended Insert the seed bounce flap pin into one of the above holes and twist seed bounce flap up into position, snapping the other side of the roll pin into the adjacent hole Re-Install seed tube
**JD EXACT EMERGE FERT TUBE
500 TT009
John Deere ExactEmerge Planter Totally Tubular field tested 3 ExactEmerge planters with our fertilizer tubes running different rates of fertilizer, at different rates of speed. Each test was successful in the following ways: 1. Fertilizer was successfully placed in the trench, below the seed. 2. Fertilizer was not building up on the brush system, nor brought back into the seed delivery system. 3. Fertilizer was successfully placed at various rates of speed, with various rates of fertilizer. Recommendations: 1. Check valves should be run with these fertilizer tubes; close to the tube, in the fertilizer line. 2. Try not to let the planter sit in the ground too long where a pool of fertilizer can form and possibly get onto the brush seed delivery system. 3. Inspect row units for build-up in the brush system when you fill your planter. Installation Instructions: These Instructions need to be followed very closely. Please read thoroughly!!! 1. Remove gauge wheels and disc blades. Remove all shims on right side. 2. Remove nut holding on the disc guard. 3. Slide ExactEmerge Fertilizer tube over disc bolt as shown. This bracket takes the place of two (2) shims. It is the exact width of two (2) shims. 4. Slide bracket on the top of the tube over the disc guard bolt as shown. 5. Tighten the disc guard nut back into place. 6. Align the tube so it is in the center of the seed tube guard and pinch the tab tightly around the guard with a channel lock. (We find a channel lock works the best.) 7. Replace all but two (2) of the shims next to the bracket. 8. The 6mm plastic line is optional. It is provided for additional pressure out of the bottom of the tube. This tube can be inserted up the bottom of the tube, leaving 1/4" sticking out of the bottom. Please inspect daily. Please note : This line may or may not need to be used. In some very dry conditions, this line may melt due to friction; if this happens, remove the plastic 6mm line.
**S.S. FERT TUBE;CASE 1200 (2011 & OLDER
500 TT100
Case Starter Fertilizer Placement Tube Part #TT-100 This tube is mounted washer down in the above pictured down tube on the planter. Simply remove the pin at the bottom of the down tube and install the fertilizer tube, making sure the 80 degree bend on the top of the tube is facing the front of the planter. Reinstall the pin through the washer on the fertilizer tube. This product does not apply below the seed. This tube does not fit on 2012 model Case planters or newer. For tubes that fit the 2012 & newer Case planters see part # TT-10012.
**S.S. FERT. TUBE;1200 CASE (2012 +)
500 TT10012
Case Starter Fertilizer Tube Part # TT-10012 This stainless steel tube applies fertilizer in-furrow for Case planters. This tube fits 2012 Case planters and newer only. This fertilizer tube does not place fertilizer below the seed. Here it is shown with the insecticide tube taken off of the planter. The stainless steel tube fits inside this part. Instructions for TT-10012 Case planter fertilizer tube: Tube must be installed from the bottom. Push tube up until its tight, the tab welded on the bottom of the tube fits inside the insecticide tube. Slide the lock collar over the top of the tube, fitting the round tab welded to the lock collar into the insecticide tube. Tighten with an allen wrench.
**ROW UNIT; WHITE 8000 SERIES
500 TT200
White Starter Fertilizer Placement Tube for 8000 Series This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. The 1/8" wall 3/8" stainless tube will easily outlast the disc scraper. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet. Key Benefits Starter Fertilizer application deeper in the soil profile Instant root uptake for early plant health Maintenance free Installation Instructions: Install plastic tubing (provided) into bottom side (where the guard is welded) of stainless steel tube. Leave approximately 1/4" to 3/16" of the plastic tubing sticking out of the stainless steel tube. You may need to cut off the plastic tubing at this point, as more than enough plastic tubing is provided. Remove depth gauge wheels and disc's, taking note of shim placement Remove factory seed tube guard Lift TT-200 up into position on row unit Align roll pin holes and install roll pins Re-Install seed tube Re-Install disc openers taking care to get the correct shim placement Re-Install depth gauge wheels Recommend replacing disc openers when you put our fertilizer tubes on.
